Second of the February Flash sales sees the two ends of the spectrum of the Dragon King Katana line go on special until midnight Valentines day..
At the high end, the stunning Kawanakajima Katana, a folded mix of T10 tool steel and 9260 spring steel with prominent clay tempered hamon and ornate, silver fittings make this blade a treasure.
And indeed, with a MSRP of $1,500 (and our everyday low price of $1200) it is very much at the pinnacle of what a production Katana can be. But with the Flash sale you can pick it up for well below WHOLESALE for just $799.99 until midnight Valentines – a HUGE saving of over $400 of our already discounted pricing and $700 off the usual MSRP!
To the high end Kawanakajima, the next Feb Flash sale item is Dragon King’s most AFFORDABLE entry level blade – their differentially hardened 65 MN Spring Steel ‘Yanone’ Katana:
Sure, it might be made from a fairly simple (yet very robust) steel and the fittings are very basic by comparison, but with the flash sale price of $249.99 (marked down from $299.99, which was marked own already from the MSRP of $439) it’s Dragon King quality at the price of generic blades and well worth a closer look..
It has been several years since we have seen a new Project X Katana blade – so it is with great pride we announce one of the most attractive looking traditional Katana blades ever produced outside of Japan, the Project X Next Generation Elite T10 Choji Hi Polish Custom Katana!
Leveraging the already proven Forge Direct and Project X Soshu Kitae Custom Katana furniture sets and customization options, this Master Smith forged blade is polished to near perfection by Master Polishers using Japanese fingerstones to make the clear natural hamon line POP like never before, and shows just how refined a T10 tool steel DH blade can be when no expense is spared.
Just take a closer look at how defined and clear the nioi of the blade can become, with prominent ashi..
With this sword added to the line up of Custom Katana we have available at SBG, there are now FOUR distinct levels or Tiers of Custom Katana blades available, from entry level Ryujin builds at Tier I (whose blades and fittings are made at the same forge, but shipped as parts to the USA and assembled to order) to Forge Direct at Tier III, which are built entirely at the forge and shipped worldwide from Longquan, and now two models of Project X at Tier IV – the new Choji blades which refine the T10 blade to its highest possible level, and the complex laminated 1095/1060/1045 blades of the original Soshu Kitae Project X Custom Katana.
This new blade also announces the end of the current sale on Forge Direct and Project X. However as we have taken all the data from the sale to arrive at the fairest and most sustainable price points for the entire project, the new sale prices are ALMOST unchanged – the Forge Direct Custom Katana only goes up from the sale price of $629.99 to an even $700 with almost all other prices remaining where they are for as long as we can sustain current sale levels – which is good news for everyone!
This T10 Choji Hamon Forge Direct Master Smith blade is complimented with a suite of Dragon themed fittings, from the 24K gold plated Dragon tsuba to the elite Mother of Pearl inlaid Dragon saya to an exclusive and highly detailed premium Dragon horimono engraving (which at $100 on one side, is normally not something we offer on the custom Katana series) complimented with upgraded Black leather ito with hishigami.
If you add it all up, the total cost of this build would normally be $924.50, but is available at the same price as the base custom Katana for just $700 shipped – and with only 10pcs ever to be made, is definitely a unique and attractive offer for lovers of Dragon themed blades..
Pretty exciting stuff – check out the current full line ups for current pricing and models available:
Ryujin swords started with their flagship T10 ‘instant’ custom Katana series, and has been steadily expanding over the last few years with forays into many other blade and steel types and can be plainly seen from their current line up over at the SBG Sword Store..
But recently their expedition into the waters of very affordably priced, well made Tactical blades has expanded enough with the following two blades to deserve a dedicated Tactical Sword section.
It’s the perfect mix between full length Katana and Wakizashi, in the most common classic tactical style out there – ABS handle with steel rivets and tough monotempered 1060 carbon steel blade. But at the current price of just $99.99, it is priced to move fast..
Based loosely on a broad family of Filipino blades known as Bolo but also very similar to the axe like chopping head of a Nepalese Kukri, whatever you want to call this 2lb, 18.5″ blade of 1060 carbon steel, best not make it angry..! Also at $99.99 for glorious two handed short windup chopping power..
See the full selection of Ryujin Tactical Swords on the new page here:
Simplicity can be beautiful – and this is very much the case for the newly released 1045 carbon steel blade Tanto in Shirasaya by Ryujin Swords:
The blade is a factory tempered and sharpened 1045 carbon steel affair with a bo-hi and faux hamon – more than sturdy enough for a blade of this size. It is housed in glossy wooden fittings with a simple black band that defines the seam between hilt and blade and looks fantastic as a display piece that is also functional should the need arise. Great value at $49.99 with $5 shipping.
At the same time, we are also delighted to announce that the Suguha hamon 5160 Spring Steel Katana line by Ryujin are making a comeback.. The blades are the same as they always were, extremely attractive spring steel with a straight ‘suguha’ hamon temper line, one of the most difficult to make cleanly. And these are very cleanly defined..
Such a great blade ideally should have great fittings, and the ‘Matsu’ Katana (so called because it has a traditional Japanese ‘Mastu’ Pine tree theme on the solid iron tsuba and the fuchigashira fittings) is no exception. All fittings are very well made, and the cotton ito is incredibly tight, made using hishigami triangles which is nearly unheard of at this price point..
And the best part, it’s STILL just $329.99 – so if you want a seriously well made, frequent use cutting sword, you could do a lot worse than the Ryujin Matsu Katana.
February looks like it is shaping up to be a busy month, so to kick things off we have the first in a series of ‘Flash Sales’ this month where we take 3-5 different swords from three of our most respected brands -specifically Dragon King, Kingston Arms and APOC – and run a short but very SHARP sale on a hand picked selection of their very best offerings.
Here’s the first swords on Sale until midnight February the 6th:
A sturdy 5160 monotempered beater that stands at the pinnacle of through hardened spring steel blades, save $100 and grab it at the bargain price of $279.99 while the sale lasts.
For those who prefer a more traditional blade, the T10 tool steel Fletching Katana with its utilitarian and yet attractive fittings is a steal at $299.99, a $50 saving of its already low everyday price of $349.99 (MSRP is actually $500).
It is one of their most popular and refined Katana with a MSRP of nearly $1400, with silver fittings, rattan wrapped premium saya and a blade to die for, it’s normally $927.95 but is on sale until midnight Feb 6th for the bargain price of just $750.00
It is the only product on sale from a different brand line, but the deal is so good that if you are a fan of extremely tough sparring blades for steel on steel combat (these are EN42J Spring Steel spring steel blades after all) they are almost being given away, marked down from $390 to $250 for the next few days only.
With the way things are going in the world, who knows when you might really need one of these in your bug out bag.. Normally on sale for $175, you can snap one up for just $137.99 while the sale is in effect.
